Agitator Mixer Tank — High-Performance Mixing Solutions by FULUKE

Traditional filtration only removes visible solid impurities. Soluble organic matter, colloids, and trace microorganisms in perfume are difficult to separate at room temperature, easily leading to turbidity, precipitation, and aroma deterioration after storage. Freeze filtration uses a low-temperature environment of -5°C to -15°C (depending on the formulation) to condense these hidden impurities into solid particles. These particles are then thoroughly trapped through precision filtration, while simultaneously allowing the fragrance components to fully blend. This is a core process that ensures the stability of high-end perfumes.

It can have a significant impact.

Highly turbid raw water (containing large amounts of sediment and colloids) can accelerate clogging of pre-filters (PP cotton) and activated carbon elements, shortening replacement cycles and increasing maintenance costs.Highly hard raw water (containing large amounts of calcium and magnesium ions) can easily form scale (calcium carbonate and magnesium carbonate) on the RO membrane surface, reducing filtration efficiency and even causing irreversible damage, shortening the life of the membrane.For this type of water quality, it is recommended to add a pretreatment device (such as a prefilter or softener) before the RO system to reduce the raw water's turbidity or hardness before entering the RO system.

Yes, we can, we provide not only products, but also solutions and designs.

Proper daily maintenance can reduce the equipment failure rate and effectively extend its service life. The operation is simple, and even beginners can easily complete it. First, after each production run, all parts that come into contact with materials, such as the material hopper, metering pump, and discharge nozzle, must be cleaned promptly to prevent residue from solidifying and clogging pipes and pumps. All material contact parts are made of 304 stainless steel, with no hard-to-reach areas, making cleaning very convenient. Second, regularly lubricate the transmission bearings, chains, and other moving parts, and check the wiring, servo motor, and sealing/cutting blade for damage to prevent wear and jamming. Finally, before starting the machine, check that the packaging film and materials are in place. If there is a missing film, abnormal temperature, or a fault alarm, immediately stop the machine for troubleshooting. Do not force the machine to start. The equipment has a built-in self-diagnostic function that can quickly locate problems for timely handling.